"It's A Brand New World"

+ Great Heath Supply

cbd #cbd cbg #cbg thc #thc cbn #cdn thcv #thcv stimulant #stimulant anti #anti depress #depress see

Here’s a breakdown of which Cannabinoid can help which problem:

Anti-psychotic – CBD

Anti-depressant – CBC/CBG

Anti-convulsive, Anti-epileptic – CBD/THC

Anti-spasmodic for spasm control – THC/CBD/THCA

Anti-proliferative (anti-cancer) – THC/CBD/CBC/CBD

Anti-biotic – CBD/CBC/CBG/CBN

Anti-Inflammatory – THC,CBC,CBN

Antioxidant – THC/CBD

Anti-diabetic – CBD

Anti-hypertensive (high blood pressure) – CBG

Anti-nausea – CBD

Anti-acne – THC/CBD/CBN

Bone Stimulant – CBD/CBC/CBG/THCV/CBN

Analgesic (pain killer) – THC/THCA/CBD/CBC/CBG

Sedative – CBG/CBN

Anti-oxidant – THC/CBD

Bronchodilator (asthma control) – THC

Appetite suppression – THCV – high levels

Appetite Increase – THCV – Low levels


90 percent of those surveyed said they would buy CBD-only products derived from marijuana. 

See the products
fun facts

Facts About Hemp

  • One acre of hemp will make the same amount of paper as 4.1 acres of trees
  • You can grow that one acre of hemp within one year, trees take many years to grow
  • The U.S. Declaration of Independence was written on hemp paper
  • Both George Washington and Thomas Jefferson, among others, grew hemp for various uses
  • Hemp can be made into oil for both consumption and as a fuel
  • Many of the candles, especially those used by Abraham Lincoln were made from hemp oil
  • The very first Levi Strauss jeans were made not from cotton but from 100% hemp fiber
  • Some of the sturdiest sails and ropes for sailing vessels are made from hemp
  • Many car parts are currently being made from hemp, especially in Canada and Europe
  • Hemp is 10 times stronger than steel for impact strength in car parts yet lighter in weight
  • Back in the early 1930s Henry Ford made a car mostly from hemp and used hemp as fuel
  • Hemp and marijuana are two totally different properties of the cannabis plant
  • It is impossible to get high from consuming or even smoking hemp

Cannabis Extractions

Cannabis Extractions: The Complete Guide

Different extracting methods offer different deliverability methods, which influence the final effect and cost of the extract or CBD. It is great to have such a variety of cannabis products. You can choose according to your preferences.

History of cannabis extracts

History of cannabis extracts

Extraction of cannabis is a simple process, which people have used for centuries. There are many records of people using cannabis tea, hash or tinctures in ancient times. The first mention of hash dates back to the year 900 in Arabia, where people used to eat it rather than smoke it. At the beginning of the second millennium, hash was spread all over the Middle East. It is likely that Napoleon and his troops brought hash to Europe from Egypt around the 1800s. A French doctor, Louis Albert-Roche, recommended the use of hashish in the 1840s. Later in Paris, there was a Club des Hashischins established, where famous writers like Balzac, Baudelaire and Hugo enjoyed the exotic hashish which may have inspired some of their great masterpieces. People used cannabis tinctures up until 1942 in the USA and up until 1970 in the UK.

Plant material

plant material

According to the method of extraction, you have to select the appropriate parts of the cannabis plant to use. You can make an extract from all parts of the plant using solvents except for live resin extract which will be discussed later. Ultimately, to make high-quality concentrates you should always use dried and properly cured cannabis.

Plant type

The plant type you use depends on your goal. If you want to have a high CBD extract with no THC, you have to use hemp or CBD-rich cannabis strains with low THC content. It is very important to use only organically grown cannabis for extraction to avoid pesticides, chemical fertilizer or any other chemicals, that could be present in dense quantities within the final product. If you don’t grow the cannabis or make the extracts yourself, be very careful about the growing and extraction method the producer used. The goal of extraction is to reduce the cannabis plant in rich extract full of the active compounds, not to have an extract full of chemicals, which could be potentially harmful

Extraction methods

There are two main groups of cannabis extracts. Solventless extracts, which are produced with no foreign substances, except water (which technically is a solvent), however, these extracts are not considered as “solvent-based”. The most frequently used solvents are alcohol, butane, and propane. CO2 is not a solvent, even though methods using CO2 are considered solvent based too.

Solventless cannabis extracts

cannabis extracts

As the name says it itself, when you produce solventless cannabis extract you don’t use any chemical solvent. All you need is water, heat, pressure and a sieve.



Hash is one of the oldest cannabis extracts known to humans. You can make hash using several different techniques. The most common process to make solventless hash is to use ice water to separate the trichomes from the plant matter since the trichomes contain most of the essential oils. When separated, they stick together and after they dry, they are pressed and the hash is ready!

Another method of making hash is the dry sift method. People prepare it using frozen buds, which are further broken down into small parts on the screen. Using this process, the trichomes are separated from the plant, falling through the sieve and are pressed into a hash-like consistency.The most potent hash is made using solvents, which we’ll talk about a bit later.



Kief refers to the tiny, sticky, white crystals covering the cannabis flower, otherwise known as the resin glands/trichomes. They contain the largest amount of the active terpenes and cannabinoids. The purpose of trichomes is actually to deter predators in the wild. Extraction of kief is a very simple process; A three chamber grinder does all the work by separating the kief from the plant into the bottom chamber.


cannabis rosin

Rosin has become very popular recently. It looks almost like a shatter, which you need to make using solvents (see below), but rosin is easier to produce since all you need is heat and pressure. Together they make the juice run out of the bud, hash and/or kief. The extract is juicy and translucent. If made properly, it keeps all the aromatic terpenes, and the potency can rise up to 70 % of THC.

Solvent-based cannabis extracts

solvent based cannabis extracts

With the rising demand for cannabis products, technologies used for extracts are becoming more and more sophisticated. Legalization has opened the door to many innovative ideas and methods to make different concentrates, and producers are always finding new solvents to get the very best from cannabis. However, it starts to become a little riskier to make and use extracts when one doesn’t have the necessary information. Firstly, the chemicals can explode. Secondly, the residual solvent can appear in the final cannabis extract, which is not desirable and can be dangerous to consume. So in case you buy these extracts, you should ask for certificates of quality.

Butane Hash Oil (BHO)

butane hash oil

The title speaks for itself, BHO is made using butane. Different hydrocarbons (propane, butane, hexane, etc.) have been used since the 1970s for food extractions (e.g. canola and corn oil). The final product can have a different consistency which is responsible for the name of the extract for example; wax, shatter, honeycomb, oil, nectar, etc.

The solvent is run through the plant matter, which makes the desirable oils come out of the plant. To remove the residual solvent, the solution is heated (butane evaporates in low temperatures) in a vacuum. Then we are sure that there is no solvent left and the cannabis extract is very potent! Thanks to using hydrocarbons, we can have up to 90% of the cannabinoids in the extracts.

Rick Simpson Oil (RSO)

rick simpson oil 

RSO is also known as Phoenix Tears. Rick Simpson came up with the production method himself. To make the extract using this method, you need to soak the whole plant in pure naphtha or isopropyl alcohol, which draws out the cannabinoids. After the solvent evaporates, the final extract is like a tar. People usually administer RSO orally or apply it to the skin.

Supercritical Fluid Extraction (CO2)

cannabis superficial fluid extraction

This process doesn’t require any chemical solvents which is also the reason why some people prefer it. The extracts are made using carbon dioxide, which is compressed until it creates supercritical fluid. This oil then strips the essential oils from the cannabis plant in a similar way to the hydrocarbons (BHO, propane, hexane). This method is unique in a way because it uses the supercritical fluid which has the properties of liquid and gas. It enables it to dissolve the plant matter very thoroughly. In comparison to BHO, the CO2 method is easier to control and the cannabis extract contains more terpenes (up to 10 % compared to BHO which has 0.5–3.5 %). This method requires very expensive equipment which is normally found in professional laboratories.

The extract is great for vaping in any kind of vaporizer, for example the vape pens in our Product Showcase !

Molecular separation

cannabis molecular separation

You may have heard of high vacuum and short path distillation. These are just different names for molecular separation. This method enables you to separate the cannabinoids and terpenes from the plant and treat the molecules with minimal thermal degradation. It is because the whole process is performed in vacuum levels below 0.01 mm Hg. It allows the distillation of high boiling point products at moderate temperatures which is beneficial because the plant isn’t exposed to high temperatures for a long time. This means that there is minimal thermal degradation of the desired compounds.



Tinctures are liquid concentrates made using alcohol extraction. Alcohol pulls out the cannabinoids and terpenes. It doesn’t require the use of heat, so it is not as dangerous as the BHO method. There is one more advantage; the tinctures can have added flavours. It is a great solution for people who don’t like the cannabis taste.

Live Resin

cannabis live resin

The live resin is one of the newest type of extract. People make it from freshly harvested cannabis plants, which are frozen immediately after harvest. This method, although still based on butane extraction, is unique because it completely reduces the “waiting time”. When you make the extracts we mentioned above, you need to dry and cure the plants prior to extraction. It can take up to 70 days. Furthermore, the terpenes are better preserved compared to using other methods. So far, this method is very rare and costly.